VOLVO
ECM-P011662 - Engine Coolant Temperature Circuit Range/Performance. Algorithm Based Failures. Signal compare failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module (ECM) compares the value from the coolant temperature sensor with an estimated value. If the value deviates too much from the estimate, the fault code is set.
Mögliche Ursachen
- Contact resistance in the connector
- Damaged engine temperature sensor
Was Sie tun können
- 1Read the fault code status with the ignition on and check whether the fault is active. Then clear the code and road test the vehicle
- 2Check the connector at the engine temperature sensor for contact resistance and oxidation
- 3If you have a diagnostic tool: read the engine temperature in live data while driving. A value that does not follow engine load and warm-up suggests the sensor may be damaged
- 4If the connector is in order and the fault remains, have a workshop check or replace the engine temperature sensor
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- A calculated engine temperature is used
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.