ECM-P012100
VOLVO
ECM-P012100 - Throttle/Pedal Position Sensor A Circuit Range/Performance. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007Nur Motor: B5254T6
- Volvo S80 (2007–)2008Nur Motor: B4204S3, B4204S4, B5254T6
- Volvo S80 (2007–)2009Nur Motor: B4204S3, B4204S4, B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11, B5254T8, D4164T
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B4204S3, B4204S4, B5254T6
- Volvo V70 (2008–)2009Nur Motor: B4204S3, B4204S4, B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11, D4164T
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The engine control module (ECM) checks the signal from the throttle position sensor, potentiometer 1. The fault code is set when the signal is faulty or the expected voltage is outside the permitted range.
Mögliche Ursachen
- Poor contact or oxidation between the engine control module and the throttle unit connectors
- Damaged throttle unit
- Damaged potentiometer 1 in the throttle unit
- Open circuit on the signal cables
- Voltage feed short-circuited to ground
Was Sie tun können
- 1Read the fault code status with the ignition on and check whether the fault is active. Then clear the code and road test the vehicle
- 2Check the connection between the control module and the throttle unit for contact resistance and oxidation
- 3If you have a diagnostic tool: read the throttle position in live data with the engine idling and while pressing the accelerator. The value should follow the pedal smoothly
- 4If no fault is found in these checks and the code returns as a permanent fault, have a workshop try replacing the throttle unit
Symptome, die Sie bemerken können2
- The engine has poor performance
- A text message is shown together with a warning symbol
Was der Fehler beeinflussen kann3
- The throttle angle is calculated from potentiometer 2 instead
- If potentiometer 2 also fails, the power supply to the throttle motor is cut off and the throttle returns to its spring-loaded position
- Cruise control is switched off while the fault is active
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.