VOLVO
ECM-P013300 - O2 Circuit Slow Response (Bank 1, Sensor 1). General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (30)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5, B6304T4
- Volvo S60 (2011–)2013–2014Nur Motor: B6304T4
- Volvo S60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Alle Motoren außer: D5244T4, D5244T5
- Volvo S80 (2007–)2008Alle Motoren außer: D4204T, D5244T4, D5244T5
- Volvo S80 (2007–)2009Alle Motoren außer: D4204T, D5244T10, D5244T4, D5244T5
- Volvo S80 (2007–)2010Alle Motoren außer: B4204T6, D4164T, D4204T, D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Alle Motoren außer: B4164T, B4204T6, B4204T7, D4164T, D5204T2, D5244T10
- Volvo S80 (2007–)2012Nur Motor: B5254T10, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013–2015Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo V60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo V60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008Alle Motoren außer: D4204T, D5244T4, D5244T5
- Volvo V70 (2008–)2009Alle Motoren außer: D4204T, D5244T10, D5244T4, D5244T5
- Volvo V70 (2008–)2010Alle Motoren außer: B4204T6, D4164T, D4204T, D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Nur Motor: B4204S3, B4204S4, B5254T10, B5254T11, B6304T4, B6324S5
- Volvo V70 (2008–)2012Nur Motor: B5254T10, B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Nur Motor: B6304T4, B6324S5
- Volvo V70 (2008–)2015Nur Motor: B6304T4
- Volvo XC60 (2009–)2009Nur Motor: B6304T2
- Volvo XC60 (2009–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2015Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2015Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the front heated oxygen sensor in bank 1, the sensor in the cylinder row nearest the front of the engine. The ECM switches the mixture back and forth and checks how closely the sensor signal keeps up. The code is set if the sensor responds too slowly or not at all.
Mögliche Ursachen
- Contact resistance in the sensor connections
- Damaged front oxygen sensor
- Short circuit between the sensor's current-carrying wires
- Open circuit in the sensor signal wire
- Air leak in the intake manifold or the exhaust manifold
Was Sie tun können
- 1Read the code, clear it and road test the car to see whether it comes back
- 2Check that the connector to the front oxygen sensor is fully engaged and free from oxidation; do not use rust solvent spray or grease in the connector
- 3Use a multimeter to check that the wires to the oxygen sensor have no open circuit and are not shorted to each other
- 4Check the hoses and gaskets at the intake and exhaust manifolds for air leaks
- 5If you have a diagnostic tool: watch the oxygen sensor value in live data with the engine warm and check that it switches between rich and lean
- 6If the fault remains after these checks, replace the front oxygen sensor
Symptome, die Sie bemerken können4
- Reduced performance
- Check engine light (MIL) on
- The engine lacks power, especially when pulling away
- The engine hesitates or jerks during acceleration, deceleration and steady speed
Was der Fehler beeinflussen kann1
- Catalytic converter diagnostics are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.