Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P013321
    VOLVO

    ECM-P013321 - O2 Sensor Circuit Slow Response (Bank 1 Sensor 1). General Signal Failures. Signal too low

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    5 Modelle

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Modelle nach Baujahr und Motor anzeigen (12)
    • Volvo S60 (2011–)2011Nur Motor: B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Nur Motor: B4204T7
    • Volvo S80 (2007–)2010Nur Motor: B4204T6
    • Volvo S80 (2007–)2011–2014Nur Motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2011Nur Motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Nur Motor: B4204T7
    • Volvo V70 (2008–)2010Nur Motor: B4204T6
    • Volvo V70 (2008–)2011Nur Motor: B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Nur Motor: B4204T7
    • Volvo XC60 (2009–)2010Nur Motor: B4204T6
    • Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7

    Was bedeutet der Fehlercode?

    Although the code is named for a low signal from the front oxygen sensor in bank 1, it is set when the sensor responds too quickly as the mixture changes. The ECM checks the sensor's wear and tests it while driving. The code is only stored once the ECM has started the test and the conditions for it have been met.

    Mögliche Ursachen

    • Short circuit between the sensor's current-carrying wires
    • Open circuit in the sensor signal wire
    • Open circuit in the wire that supplies the sensor's calibration current
    • Damaged front oxygen sensor

    Was Sie tun können

    1. 1Read the code, clear it and road test the car to see whether it comes back
    2. 2Check that the connector to the front oxygen sensor is fully engaged and free from oxidation; do not use rust solvent spray or grease in the connector
    3. 3Use a multimeter to check that the wires to the oxygen sensor have no open circuit and are not shorted to each other
    4. 4If you have a diagnostic tool: check in live data that the oxygen sensor signal follows the switches between rich and lean mixture smoothly, without dropouts
    5. 5If the fault remains after these checks, try a new front oxygen sensor

    Symptome, die Sie bemerken können1

    • Check engine light (MIL) on

    Was der Fehler beeinflussen kann1

    • Catalytic converter diagnostics are disabled

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.