Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P013324
    VOLVO

    ECM-P013324 - O2 Sensor Circuit Slow Response (Bank 1 Sensor 1). General Signal Failures. Signal stuck high

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    10 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (27)
    • Volvo S60 (2011–)2011–2012Nur Motor: B6304T4
    • Volvo S60 (2011–)2013Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
    • Volvo S60 (2011–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
    • Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
    • Volvo S80 (2007–)2011–2012Nur Motor: B6304T4, B6324S4, B6324S5
    • Volvo S80 (2007–)2013Nur Motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
    • Volvo S80 (2007–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
    • Volvo S80 (2007–)2015Alle Motoren außer: B4164T, D4162T, D4204T5, D5204T3, D5244T15
    • Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9
    • Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D4204T14, D5204T6
    • Volvo V60 (2011–)2011–2012Nur Motor: B6304T4
    • Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4
    • Volvo V60 (2011–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4
    • Volvo V60 (2011–)2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2011Nur Motor: B6304T4, B6324S5
    • Volvo V70 (2008–)2012Nur Motor: B6304T4
    • Volvo V70 (2008–)2013Nur Motor: B5204T9, B6304T4
    • Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, B5204T9, B6304T4
    • Volvo XC60 (2009–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
    • Volvo XC60 (2009–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S4, B6324S5
    • Volvo XC60 (2009–)2015Alle Motoren außer: B4204T7, D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
    • Volvo XC70 (2008–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
    • Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, B6304T4, B6324S4, B6324S5
    • Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5

    Was bedeutet der Fehlercode?

    The front oxygen sensor in bank 1 gives a signal that stays fixed at a high level instead of switching between rich and lean mixture. The engine control module (ECM) compares the sensor signal with how the mixture is being controlled and sets the code if the sensor stays inactive or responds sluggishly.

    Mögliche Ursachen

    • Contact resistance in the sensor connections
    • Short circuit between the sensor wires
    • Signal wire shorted to supply voltage
    • Damaged or dirty front oxygen sensor

    Was Sie tun können

    1. 1Read the code, clear it and road test the car to see whether it comes back
    2. 2Check that the oxygen sensor connector is fully engaged and free from oxidation; do not use rust solvent spray or grease
    3. 3Use a multimeter to check that the signal wire has no contact with battery voltage and is not shorted to other wires
    4. 4If you have a diagnostic tool: check in live data that the oxygen sensor signal moves when the engine is warm and the mixture switches
    5. 5If the fault remains after these checks, replace the front oxygen sensor

    Symptome, die Sie bemerken können4

    • Reduced performance
    • Check engine light (MIL) on
    • The engine lacks power, especially when pulling away
    • The engine hesitates or surges during acceleration, deceleration and steady speed

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.