ECM-P013416
VOLVO
ECM-P013416 - O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 1). General Electrical Failures. Circuit voltage below threshold
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011–2014Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4204T7
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
Although the code is named for a low voltage, it is set when the signal from the front oxygen sensor in bank 1 is outside its permitted operating range, or when the sensor's pre-heating voltage disturbs the signal. The engine control module (ECM) monitors the sensor signal while driving and only sets the code once the test has started and the conditions are met.
Mögliche Ursachen
- Signal wire shorted to the pre-heating circuit
- Ground wire shorted to the pre-heating circuit
- Damaged front oxygen sensor
Was Sie tun können
- 1Read the code, clear it and road test the car to see whether it comes back
- 2Use a multimeter to check that the wires to the oxygen sensor are not shorted to each other, especially the signal wire against the pre-heating wires
- 3Check that the ground wire to the oxygen sensor is not shorted to the pre-heating circuit
- 4If you have a diagnostic tool: read the oxygen sensor signal in live data with the engine running and check that it is not stuck outside the normal range
- 5If the wiring is intact, replace the front oxygen sensor
Symptome, die Sie bemerken können1
- Check engine light (MIL) on
Was der Fehler beeinflussen kann2
- Front oxygen sensor control is switched off
- Catalytic converter diagnostics are disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.