VOLVO
ECM-P013513 - O2 Sensor Heater Circuit (Bank 1 Sensor 1). General Electrical Failures. Circuit open
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2015Nur Motor: D4162T
- Volvo S80 (2007–)2012–2015Nur Motor: D4162T
- Volvo V40 (2013–)2013–2015Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2015Nur Motor: D4162T
- Volvo V70 (2008–)2012–2015Nur Motor: D4162T
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the heater in the front oxygen sensor in bank 1. The code is set when the signal to the sensor heater is incorrect, in this case because the circuit is broken. The ECM receives information from the sensor about the fuel/air mixture, so a broken heater circuit can affect how quickly the sensor warms up.
Mögliche Ursachen
- Contact resistance or oxidation in the connections
- Open circuit in the ground wire
- Damaged oxygen sensor
Was Sie tun können
- 1Read the code, clear it and road test the car to see whether it comes back
- 2Check that the fuse for the oxygen sensor heater is intact
- 3Use a multimeter to check that the ground wire to the oxygen sensor has no open circuit
- 4Check the connectors at the oxygen sensor for contact resistance and oxidation; do not use rust solvent spray or grease
- 5If the wiring is intact, replace the front oxygen sensor
Symptome, die Sie bemerken können1
- Check engine light (MIL) on
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.