Was bedeutet der Fehlercode ECM-P013598?

Diagnose und Fehlercodedefinition für ECM-P013598 (Volvo C30 (2007–2013), Volvo S40 (2004–2013), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P013598 - O2 Sensor Heater Circuit (Bank 1 Sensor 1). Component Failures. Component or system over temperature

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

9 Modelle

C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

Modelle nach Baujahr und Motor anzeigen (9)

Was bedeutet der Fehlercode?

The engine control module (ECM) monitors the heater in the front oxygen sensor in bank 1. The code indicates that the heater or its control circuit has become too hot, and the ECM sets it when the signal to the heater is incorrect. The ECM uses the sensor signal to control the fuel/air mixture.

Mögliche Ursachen

Contact resistance or oxidation in the connections
Open circuit or short circuit in the wiring
Damaged oxygen sensor
Damaged engine control module (ECM)

Was Sie tun können

1Read the code, clear it and road test the car to see whether it comes back
2Check that the fuse for the oxygen sensor heater is intact
3Check the connectors at the oxygen sensor for contact resistance and oxidation; do not use rust solvent spray or grease
4Use a multimeter to check that the wires to the sensor heater have no open circuit and are not shorted
5If the connectors and wiring are intact, replace the front oxygen sensor; if you suspect the engine control module is damaged, have a workshop check it

Symptome, die Sie bemerken können1

Check engine light (MIL) on

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.