VOLVO
ECM-P013617 - O2 Sensor Circuit (Bank 1 Sensor 2). General Electrical Failures. Circuit voltage above threshold
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
Although the code is named for a high voltage, it concerns the signal from the oxygen sensor in bank 1, sensor 2, which is incorrect. The engine control module (ECM) uses the signal to assess the mixture in the exhaust and sets the code when it is incorrect, after the test has started. The ECM then calculates a value for the mixture instead.
Mögliche Ursachen
- Signal shorted to voltage
- Damaged oxygen sensor
Was Sie tun können
- 1Read the code, clear it and road test the car to see whether it comes back
- 2Switch the ignition off and use a multimeter to check that the signal wire between the control module and the oxygen sensor has no open circuit
- 3Check that the signal wire has no contact with battery voltage
- 4If the wire is intact, replace the oxygen sensor
Symptome, die Sie bemerken können1
- Check engine light (MIL) on
Was der Fehler beeinflussen kann1
- The engine control module uses a calculated value for the mixture
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.