VOLVO
ECM-P013A00 - O2 Sensor Slow Response - Rich to Lean (Bank 1 and Sensor 2). General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (39)
- Volvo S60 (2011–)2011Nur Motor: B4204T6, B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2012Nur Motor: B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2013Nur Motor: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2010Nur Motor: B4204T6, B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Nur Motor: B4204T6, B4204T7, B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Nur Motor: B4204T6, B4204T7, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Nur Motor: B4204T6, B4204T7, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Alle Motoren außer: B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Alle Motoren außer: B4164T, D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D5204T6
- Volvo V60 (2011–)2011Nur Motor: B4204T6, B4204T7, B6304T4
- Volvo V60 (2011–)2012Nur Motor: B4204T7, B6304T4
- Volvo V60 (2011–)2013Nur Motor: B4204T7, B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4204T5
- Volvo V60 (2011–)2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Nur Motor: B4204T6, B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011Nur Motor: B4204T6, B4204T7, B6304T4, B6324S5
- Volvo V70 (2008–)2012Nur Motor: B4204T7, B6304T4, B6324S5
- Volvo V70 (2008–)2013Nur Motor: B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Nur Motor: B4204T11, B4204T7, B5204T9, B6304T4, B6324S5, D4204T5
- Volvo V70 (2008–)2015Nur Motor: B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Alle Motoren außer: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Alle Motoren außer: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Alle Motoren außer: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Nur Motor: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Alle Motoren außer: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Alle Motoren außer: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Nur Motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo XC90 (2003–)2010Nur Motor: B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
This is an event-controlled information code, and it does not always mean a real fault. The engine control module (ECM) follows how well the rear oxygen sensor in bank 1 keeps up when the mixture switches from rich to lean. The sensor may react too slowly at the switch, and this is only checked in certain driving cases with fuel cut-off.
Mögliche Ursachen
- Contact resistance or oxidation in the connections
- Damaged or dirty rear oxygen sensor
- Damaged middle oxygen sensor, on cars with three oxygen sensors
Was Sie tun können
- 1If the car runs normally, nothing needs to be done; read the code and clear it
- 2Check the connector to the rear oxygen sensor for contact resistance and oxidation; do not use rust solvent spray or grease
- 3Road test the car, preferably with some decelerations where the accelerator is fully released, and read the code again
- 4If you have a diagnostic tool: check in live data that the rear sensor signal changes when the accelerator is released
- 5If the code returns and the car behaves differently, have a workshop check the oxygen sensor control
Symptome, die Sie bemerken können1
- Check engine light (MIL) on
Was der Fehler beeinflussen kann1
- The engine control module uses a calculated value for the mixture
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.