Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P014500
    VOLVO

    ECM-P014500 - O2 Sensor Circuit Slow Response (Bank 1 Sensor 3). General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    8 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (15)
    • Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo S80 (2007–)2010Nur Motor: B6324S2
    • Volvo S80 (2007–)2011–2013Nur Motor: B6324S4
    • Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B6324S4
    • Volvo V40 (2013–)2015Nur Motor: B4204T11
    • Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11
    • Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo V70 (2008–)2010Nur Motor: B6324S2
    • Volvo V70 (2008–)2014–2015Nur Motor: B4204T11
    • Volvo XC60 (2009–)2010Nur Motor: B6324S2
    • Volvo XC60 (2009–)2011–2013Nur Motor: B6324S4
    • Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6324S4
    • Volvo XC70 (2008–)2010Nur Motor: B6324S2
    • Volvo XC70 (2008–)2011–2013Nur Motor: B6324S4
    • Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, B6324S4

    Was bedeutet der Fehlercode?

    The engine control module (ECM) measures how long the rear oxygen sensor in bank 1, sensor 3, takes to switch from rich to lean mixture. The code is set when the sensor reacts too slowly during a fuel cut-off. The test is only run once the engine is at operating temperature and after at least two longer fuel cut-offs in normal driving, and the code only applies to cars with three oxygen sensors.

    Mögliche Ursachen

    • Contact resistance or oxidation in the connections
    • Damaged or dirty rear oxygen sensor, sensor 3

    Was Sie tun können

    1. 1Read the code, clear it and road test the car to see whether it comes back
    2. 2Check the connector to the sensor for contact resistance and oxidation; do not use rust solvent spray or grease
    3. 3If you have a diagnostic tool: check in live data that the sensor signal follows the switches between rich and lean when the accelerator is released during a deceleration
    4. 4If the connector is clean and intact, replace the rear oxygen sensor

    Symptome, die Sie bemerken können1

    • Check engine light (MIL) on

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.