VOLVO
ECM-P016800 - Engine Fuel Temperature Too High. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
Each fuel injector has a built-in fuel temperature sensor, and the engine control module (ECM) receives the temperatures via LIN communication. The control module compares the values with permitted limits and sets the code when cylinder 4's injector reports a temperature above the highest permitted value.
Mögliche Ursachen
- Loose connection or oxidation in the connections
- Cylinder 4's injector is damaged
Was Sie tun können
- 1Read the fault codes; if there are codes for communication with the fuel injectors, fix those first, as this code is then a secondary fault
- 2Check the connectors to the fuel injector for cylinder 4 for looseness, contact resistance and oxidation
- 3Clear the code, road test the car and read the codes again to see whether it comes back
- 4If no fault is found in these checks, the fuel injector for cylinder 4 must be replaced
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The control module takes the reading from another injector instead
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.