VOLVO
ECM-P018500 - Fuel Temperature Sensor "B" Circuit. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The control module (ECM) compares the fuel temperature readings from the sensors in the injectors with each other. The code is set when one of the sensors shows a different value from the other three, which may be caused by a damaged injector on cylinder 4. The fault normally gives no noticeable symptoms for the driver.
Mögliche Ursachen
- Damaged injector on cylinder 4
Was Sie tun können
- 1Read and clear the code, then run the engine for a while to see whether it returns
- 2If you have a diagnostic tool: compare the temperature from each injector in live data and see which one differs from the other three
- 3Check that the connector to the injector on cylinder 4 is secure and free from oxidation
- 4If the fault remains after these checks, have a workshop with diagnostic equipment check the injector on cylinder 4
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.