Was bedeutet der Fehlercode ECM-P018D00?

Diagnose und Fehlercodedefinition für ECM-P018D00 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P018D00 - Fuel Pressure Sensor "B" Circuit High. General Failure Information. No sub type information

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

8 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

The control module (ECM) reads the fuel pressure in the low-pressure system from a fuel pressure sensor and checks the sensor's DC voltage. The code is set when the signal rises above the upper permitted limit, and the wrong value must be present in two or more drive cycles in a row. The fault can therefore arise even when the engine is not running.

Mögliche Ursachen

Open circuit in the signal or earth wire to the fuel pressure sensor
Contact resistance or oxidation in the connections
Signal wire shorted to voltage
Damaged fuel pressure sensor
Wires shorted to voltage

Was Sie tun können

1Read and clear the code, then run the engine to see whether it returns
2Check the connector at the fuel pressure sensor for looseness, oxidation and damage
3Use a multimeter to check that the signal wire has no voltage with the ignition on and that it has no break
4If you have a diagnostic tool: read the fuel pressure in live data and see whether the value changes when the engine is loaded
5If the fault remains after these checks, a workshop should check the sensor and its wiring

Symptome, die Sie bemerken können1

The Check engine lamp lights up or behaves abnormally

Was der Fehler beeinflussen kann2

A fixed fuel pressure value is used
The fuel pump is controlled with a constant signal

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.