Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P019000
    VOLVO

    ECM-P019000 - Fuel Rail Pressure Sensor. General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    7 Modelle

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (13)
    • Volvo S60 (2011–)2011–2014Nur Motor: B6304T4
    • Volvo S60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
    • Volvo S80 (2007–)2007Nur Motor: B6324S
    • Volvo S80 (2007–)2008–2009Nur Motor: B6304T2, B6324S
    • Volvo V60 (2011–)2011–2014Nur Motor: B6304T4
    • Volvo V60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
    • Volvo V70 (2008–)2008–2009Nur Motor: B6304T2, B6324S
    • Volvo XC60 (2009–)2009–2010Nur Motor: B6304T2
    • Volvo XC60 (2009–)2011–2015Nur Motor: B6304T4
    • Volvo XC70 (2008–)2008Nur Motor: B6324S
    • Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
    • Volvo XC90 (2003–)2007–2010Nur Motor: B6324S
    • Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5

    Was bedeutet der Fehlercode?

    The control module (ECM) measures the pressure in the fuel rail with a fuel pressure sensor and checks the sensor voltage. The code is set when the wrong value remains for two or more drive cycles in a row. The fault may show up as a lit environmental warning lamp and as the engine misfiring.

    Mögliche Ursachen

    • Open circuit in the signal or earth wire
    • Contact resistance or oxidation in the connections
    • Signal wire shorted to voltage
    • Open circuit in the signal wire
    • Damaged fuel pressure sensor

    Was Sie tun können

    1. 1Check that the fuses are intact, especially those supplying the engine control and the fuel pump
    2. 2If you have a diagnostic tool: read the fuel rail pressure in live data and see whether the value follows the engine load
    3. 3Check the connector at the fuel pressure sensor for looseness, oxidation and damage
    4. 4Use a multimeter to check that the signal wire has no break and is not shorted to voltage or earth
    5. 5If the fault remains after these checks, a workshop should check the fuel pressure sensor and its wiring

    Symptome, die Sie bemerken können2

    • The environmental warning lamp lights up
    • The engine misfires

    Was der Fehler beeinflussen kann2

    • A fixed fuel pressure value is used
    • The fuel pump is controlled with a constant signal

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.