VOLVO
ECM-P019200 - Fuel Rail Pressure Sensor A Circuit Low. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
12 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (41)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Nur Motor: D5204T2, D5244T10
- Volvo S80 (2007–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4162T, D5204T6
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Nur Motor: D5204T2, D5244T10
- Volvo V70 (2008–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Was bedeutet der Fehlercode?
The control module (ECM) monitors the signal from the fuel pressure sensor. The code is set when the control module receives too low a signal from the sensor. This can cause a loss of power, and the control module then uses a calculated value for the fuel pressure instead.
Mögliche Ursachen
- Poor contact or oxidation in the connectors, and looseness in the connections
- Signal wire shorted to earth
- Damaged fuel pressure sensor
- Open circuit in the signal wire or the voltage supply
- Clogged fuel filter
- Damaged fuel pump
Was Sie tun können
- 1Check that the fuses are intact
- 2Read and clear the code, then start the engine to see whether it returns
- 3Check the connector at the fuel pressure sensor for contact resistance, oxidation and open circuits
- 4Use a multimeter to check that the signal wire is not shorted to earth
- 5If you have a diagnostic tool: read the fuel pressure in live data with the engine running and see whether the value stays at a clearly low level
- 6If the fault remains, a workshop should check the voltage supply to the fuel pressure sensor and the fuel filter
Symptome, die Sie bemerken können2
- Poor performance and lack of power
- Message in the display together with a warning symbol
Was der Fehler beeinflussen kann2
- The control module uses a calculated value
- Engine torque may be limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.