VOLVO
ECM-P019500 - Engine Oil Temperature Sensor Circuit. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The control module (ECM) compares the engine oil temperature with the coolant temperature. If the two differ too much, this is interpreted as a fault in the oil temperature sensor and the code is set. The fault normally gives no noticeable symptoms for the driver.
Mögliche Ursachen
- Contact resistance or oxidation in the connectors to the oil temperature sensor
- Open circuit in the signal wire
- Damaged oil temperature sensor
Was Sie tun können
- 1Read and clear the code, then see whether it returns after a while of driving
- 2Check that the fuses are intact
- 3Check the connector at the oil temperature sensor for looseness, oxidation and contact resistance
- 4Use a multimeter to check that the signal wire to the sensor has no break
- 5If you have a diagnostic tool: read the engine oil temperature and the coolant temperature in live data at the same time and compare them
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.