Was bedeutet der Fehlercode ECM-P019622?

Diagnose und Fehlercodedefinition für ECM-P019622 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P019622 - Engine Oil Temperature Sensor "A" Range/Performance. General Signal Failures. Signal too high

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

8 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

The control module (ECM) compares the oil temperature with the air temperature from the mass air flow sensor, the coolant temperature and the outside temperature. The code is set when the difference is too large and the signal from the sensor is too high.

Mögliche Ursachen

Signal wire shorted to voltage
Damaged sensor for engine oil pressure and oil temperature

Was Sie tun können

1Check that the fuses are intact
2Read and clear the code, then start the engine to see whether it returns
3Check the combined oil pressure and oil temperature sensor connector for damage and oxidation
4Use a multimeter to check that the signal wire is not shorted to voltage
5If you have a diagnostic tool: read the oil temperature in live data and see whether it is high compared with the coolant temperature when the engine is warm
6If the fault remains, a workshop should check the sensor and its wiring

Symptome, die Sie bemerken können1

No noticeable symptoms for the driver

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.