VOLVO
ECM-P019800 - Engine Oil Temperature Sensor Circuit High Input. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The control module (ECM) keeps an eye on engine oil temperature. The code is set when the reading from the oil temperature sensor is faulty, in this case too high.
Mögliche Ursachen
- Signal wire shorted to voltage
- Damaged oil temperature sensor
Was Sie tun können
- 1Check that the fuses are intact
- 2Read and clear the code, then see whether it returns after a while of driving
- 3Check the oil temperature sensor connector for damage and oxidation
- 4Use a multimeter to check that the signal wire is not shorted to voltage, with the ignition on
- 5If the fault remains, a workshop with diagnostic equipment should check the sensor and its wiring
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.