VOLVO
ECM-P01B600 - Alternative Fuel Rail Temperature Sensor Circuit Low. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The control module (ECM) receives the fuel temperature from the injectors over LIN communication and compares it with calibrated limits. The code is set when the temperature from the injector on cylinder 3 falls below the lowest permitted value, and the control module then uses the temperature from one of the other injectors instead.
Mögliche Ursachen
- Looseness or oxidation in the connections
- Damaged injector on cylinder 3
Was Sie tun können
- 1If there are codes for missing or faulty communication with the injectors, fix those first, as this code is then a follow-on fault
- 2Check the injector connectors, especially on cylinder 3, for looseness and oxidation
- 3If you have a diagnostic tool: read the temperature from each injector in live data and see whether cylinder 3 is low compared with the others
- 4If no fault is found in these checks, the injector on cylinder 3 may need to be replaced, which is a workshop job
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The temperature from one of the other injectors is used instead
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.