VOLVO
ECM-P01B700 - Alternative Fuel Rail Temperature Sensor Circuit High. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The control module (ECM) checks the temperature signals from the injectors against calibrated limits. The code is set when the temperature from the injector on cylinder 3 rises above the highest permitted value, and the control module then uses the temperature from one of the other injectors.
Mögliche Ursachen
- Poor connection with looseness or oxidation
- Damaged injector on cylinder 3
Was Sie tun können
- 1If there are other codes for missing or faulty communication with the injectors, this code is a follow-on fault, so those should be fixed first
- 2Check the injector connectors, especially on cylinder 3, that they are secure and free from oxidation
- 3If you have a diagnostic tool: read the temperature from each injector in live data and see whether cylinder 3 reads high compared with the others
- 4If no fault is found in these checks, the injector on cylinder 3 may need to be replaced, which a workshop does
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The temperature from one of the other injectors is used instead
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.