VOLVO
ECM-P01B800 - Alternative Fuel Rail Temperature Sensor Circuit Intermittent/Erratic. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The code is set when the temperature from the injector on cylinder 4 falls below the lowest permitted value. The signal is erratic, and the control module then uses the temperature from one of the other injectors.
Mögliche Ursachen
- Loose connection or oxidation in the connections
- Damaged injector on cylinder 4
Was Sie tun können
- 1If there are other codes for missing or faulty communication with the injectors, this code is a follow-on fault and those should be fixed first
- 2Check the injector connectors on cylinder 4 for looseness, oxidation and damage
- 3If you have a diagnostic tool: read the temperature from each injector in live data and see whether cylinder 4 jumps or stays low compared with the others
- 4If no fault is found in these checks, the injector on cylinder 4 may need to be replaced, which a workshop does
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The temperature from one of the other injectors is used instead
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.