VOLVO
ECM-P01C200 - Fuel Rail Pressure Sensor Circuit Intermittent/Erratic (Bank 2). General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The control module (ECM) compares the signal levels from the pressure sensors in the injectors on cylinders 1 and 4 with both the highest and the lowest permitted values. The code is set when the signal level for either of these two falls outside the limits. The signal is erratic.
Mögliche Ursachen
- Looseness or oxidation in the connections
- Faulty pressure sensor in the injector on cylinder 1
- Faulty pressure sensor in the injector on cylinder 4
Was Sie tun können
- 1Read and clear the code, then start the engine to see whether it returns
- 2Check the connectors to the injectors on cylinders 1 and 4 for looseness and oxidation
- 3If you have a diagnostic tool: compare the pressure from the injectors on cylinders 1 and 4 with the others in live data and see whether either differs
- 4If the fault remains, a workshop with diagnostic equipment should check the pressure sensors in the injectors on cylinders 1 and 4
Symptome, die Sie bemerken können2
- The engine may stall at idle
- The engine may stall while driving
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.