VOLVO
ECM-P020068 - Injector Circuit. Algorithm Based Failures. Event information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
This code is an event-controlled information code and does not indicate a fault in the control module. It is set when one or more injectors are switched off, which can be done during fault finding. The code does not need to be cleared; it disappears by itself when the conditions no longer apply.
Mögliche Ursachen
- One or more injectors are switched off, for example during fault finding with vehicle communication
Was Sie tun können
- 1There is no real fault finding procedure for this code, as it is an information code
- 2If you have switched off an injector with a diagnostic tool, switch it on again and check that the code disappears
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.