Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P023621
    VOLVO

    ECM-P023621 - Turbo/Super Charger Boost Sensor A Circuit Range/Performance. General Signal Failures. Signal too low

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    3 Modelle

    S60 (2011–), S80 (2007–), V70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
    • Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
    • Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Nur Motor: B5254T10
    • Volvo V70 (2008–)2008Nur Motor: B5254T6
    • Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Nur Motor: B5254T10

    Was bedeutet der Fehlercode?

    The boost pressure sensor reads inside its usual band, but it is lower than the value the engine control module (ECM) calculates from atmospheric pressure. The fault therefore means the sensor reading does not match what is expected, not that the signal is outside its range.

    Mögliche Ursachen

    • Contact resistance or oxidation in the connections
    • Boost pressure sensor is loose
    • Damaged boost pressure sensor

    Was Sie tun können

    1. 1Read the code, clear it and road test to see whether it returns
    2. 2Check that the boost pressure sensor is fitted securely in its mount and has not worked loose
    3. 3Look at the sensor connector for oxidation and loose connections
    4. 4If you have a diagnostic tool: read boost pressure in live data with the ignition on and compare it with atmospheric pressure. The two should agree
    5. 5If the fault remains, have a workshop check and, if needed, replace the boost pressure sensor with diagnostic equipment

    Symptome, die Sie bemerken können2

    • The malfunction indicator lamp comes on
    • The car performs worse than usual

    Was der Fehler beeinflussen kann1

    • Boost pressure is limited

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.