VOLVO
ECM-P023622 - Turbo/Super Charger Boost Sensor A Circuit Range/Performance. General Signal Failures. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The boost pressure sensor reads inside its usual band but higher than the boost pressure the engine control module (ECM) calculates. The fault therefore means the sensor reading does not match what is expected, not that the signal lies outside its range.
Mögliche Ursachen
- Contact resistance or oxidation in the connections
- Damaged boost pressure sensor
Was Sie tun können
- 1Read the code, clear it and road test to see whether it returns
- 2Look at the boost pressure sensor connector for oxidation, chafing and loose connections
- 3Make sure the boost pressure sensor sits properly and has not come loose from its mount
- 4If you have a diagnostic tool: read boost pressure in live data at idle and see whether the value is unreasonably high for how the engine is running
- 5If the fault remains, have a workshop check the boost pressure sensor with diagnostic equipment
Symptome, die Sie bemerken können2
- The malfunction indicator lamp comes on
- The car performs worse than usual
Was der Fehler beeinflussen kann1
- Boost pressure is limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.