VOLVO
ECM-P024300 - Turbo/Super Charger Wastegate Solenoid A. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the signal wire to the turbo control valve, which is the wastegate A solenoid. The fault is set when the control module detects a break in that wire.
Mögliche Ursachen
- Open circuit in the signal wire
- Open circuit in the supply wire
- Damaged turbo control valve
Was Sie tun können
- 1Read the code, clear it and road test to see whether it returns
- 2Check the fuse for the circuit. Fuse locations are shown in the owner's manual
- 3Look at the turbo control valve connector for oxidation, loose connections and chafing
- 4If you have a diagnostic tool: activate the turbo control valve and check that it responds
- 5If the fault remains, have a workshop check the wiring and the turbo control valve with diagnostic equipment
Symptome, die Sie bemerken können2
- The malfunction indicator lamp comes on
- The car performs worse than usual
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.