VOLVO
ECM-P024D00 - Intercooler Bypass Valve Position Sensor. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The engine control module (ECM) compares the bypass valve position with the position it calculates when the valve opens and closes. The fault is set when the difference between them is too large.
Mögliche Ursachen
- Loose contact, contact resistance or oxidation in the connector
- Open circuit or short to ground or voltage in the wires to the bypass valve
- Bypass valve is sticking or jammed
- Damaged bypass valve
Was Sie tun können
- 1Read the code, clear it and road test to see whether it returns
- 2Look at the bypass valve connector for play, oxidation and loose connections
- 3Use a multimeter to check that the wires to the bypass valve are not broken and not shorted to ground or positive
- 4If you have a diagnostic tool: activate the bypass valve and see whether the position value in live data changes smoothly
- 5If the fault remains, have a workshop check the bypass valve and its position sensor with diagnostic equipment
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.