VOLVO
ECM-P02514B - Injection Pump Fuel Metering Control A. System Internal Failures. Over temperature
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The ECM watches the fuel pressure control valve and how it works. The fault is set when the control module registers a temperature that is too high in connection with the valve, which can cause the engine to stall or not start.
Mögliche Ursachen
- The fuel pressure control valve is sticking, and there may be contamination such as water or dirt in the fuel system
- Damaged fuel pressure control valve
Was Sie tun können
- 1Read the code, clear it and road test to see whether it returns
- 2Check that the fuel level in the tank is not low, and top up if it is
- 3Check whether the fuel filter is clogged or old, and have a workshop replace it if needed
- 4Look under the car and along the fuel lines for fuel leaks
- 5If the fault remains, have a workshop check the fuel pressure control valve with diagnostic equipment
Symptome, die Sie bemerken können3
- The car feels poor to drive, with reduced performance and lack of power
- The engine stalls
- The engine will not start or does not crank
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.