Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P029C68
    VOLVO

    ECM-P029C68 - Cylinder 1 Balance - Injector Restricted. Algorithm Based Failures. Event information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    4 Modelle

    S80 (2007–), V70 (2008–), XC70 (2008–), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo S80 (2007–)2007–2009Nur Motor: B6324S
    • Volvo V70 (2008–)2008–2009Nur Motor: B6324S
    • Volvo XC70 (2008–)2008–2009Nur Motor: B6324S
    • Volvo XC90 (2003–)2007–2010Nur Motor: B6324S
    • Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5

    Was bedeutet der Fehlercode?

    This code is event-based and linked to an algorithm. The engine control module (ECM) compares the lambda values of the cylinders in bank 1, cylinders 1 to 3, and cannot even out the difference with individual cylinder lambda control, since the deviation is too large. The cause is mechanical and lies in the engine.

    Mögliche Ursachen

    • Mechanical causes in the engine

    Was Sie tun können

    1. 1There is no fault-tracing for this code; it is an event code that shows the control range has been used up
    2. 2Read and note the fault code, and clear it if needed
    3. 3Have a workshop with diagnostic equipment examine the mechanics of the engine for cylinders 1 to 3, for example the compression

    Symptome, die Sie bemerken können1

    • No noticeable symptoms for the driver

    Was der Fehler beeinflussen kann1

    • Individual cylinder lambda control is switched off

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.