VOLVO
ECM-P02A800 - Cylinder 4 - Injector Restricted. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors how much fuel each injector delivers per cylinder. For cylinder 4, the code is stored when the injected fuel amount has deviated from the expected amount over several injections in a row. The code deals with small fuel quantities and is general.
Mögliche Ursachen
- Injector sticking or stuck
- Worn injector
Was Sie tun können
- 1Read and note the fault code, clear it and test drive to see whether it returns
- 2If you have a diagnostic tool: activate the cylinder 4 injector and see whether it responds
- 3Check the connector to the cylinder 4 injector for contact resistance and oxidation
- 4Have a workshop with diagnostic equipment check the cylinder 4 injector and replace it if it is sticking or worn
Symptome, die Sie bemerken können3
- The car lacks power
- The car hesitates, surges or runs jerkily, at any time or all the time
- The Check engine light comes on or behaves abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.