Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P02CA00
    VOLVO

    ECM-P02CA00 - Turbocharger/Supercharger "B" Overboost Condition. General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    8 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (8)
    • Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, D4204T5
    • Volvo V40 (2013–)2015Nur Motor: B4204T11, D4204T14
    • Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11, D4204T14
    • Volvo V60 (2011–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
    • Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5

    Was bedeutet der Fehlercode?

    The code concerns turbo unit B, where the boost pressure is above the permitted limit. The two turbo units share the boost control: the smaller one works at lower engine speeds and the larger one at higher speeds. The code is stored when the engine control module (ECM) detects that the compressor pressure is too high. It is a general code.

    Mögliche Ursachen

    • Clogged hoses to the turbo unit or the turbo control valve
    • Compressor bypass valve sticking or stuck in the closed position
    • Damaged bypass turbo control valve
    • Wastegate turbo control valve sticking
    • Damaged pressure actuator for the wastegate valve

    Was Sie tun können

    1. 1Read and note the fault code, clear it and test drive to see whether it returns
    2. 2Check that the hoses to the turbo unit and the turbo control valve are not clogged or damaged
    3. 3If you have a diagnostic tool: activate the bypass turbo control valve and see whether it clicks when activated
    4. 4Check that the wastegate valve and its pressure actuator are not sticking and are correctly set
    5. 5Check that the compressor bypass valve has not stuck in the closed position
    6. 6Have a workshop with diagnostic equipment check turbo unit B and its valves

    Symptome, die Sie bemerken können4

    • The car lacks power, especially when pulling away from standstill
    • The car lacks power
    • The car hesitates or surges during acceleration, deceleration and at steady speed
    • A message in the display together with a warning symbol

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.