VOLVO
ECM-P02FA00 - Diesel Intake Air Flow Position Sensor Minimum/Maximum Stop Performance. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the EGR valve and performs an adaptation of it when needed, to check that the values are plausible. If the signal from the EGR valve position sensor is faulty or implausible, the fault code is stored. The code is general and does not specify the type of fault. The fault affects EGR control.
Mögliche Ursachen
- Loose connection
- Contact resistance or oxidation in the connections
- Damaged position sensor
- Damaged EGR valve
Was Sie tun können
- 1Read the fault code, clear it and test drive the car to see whether it returns
- 2Check that the fuses are intact; their locations are shown in the owner's manual or on the fuse box cover
- 3Check the connectors to the EGR valve and position sensor for play and oxidation; gently move them with the engine running and see whether the fault changes
- 4If you have a diagnostic tool: read the EGR valve position in live data with the engine running and see whether the value changes when the engine is loaded
- 5Have a workshop with diagnostic equipment carry out the EGR adaptation and check the position sensor and the EGR valve
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- No exhaust gas recirculation (EGR) control
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.