VOLVO
ECM-P030100 - Cylinder 1 Misfire Detected. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (46)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: B5254T5, B6304T4, D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: B5254T5, B6304T4, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D4204T5
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D4204T5
- Volvo S80 (2007–)2007
- Volvo S80 (2007–)2008–2009Alle Motoren außer: D4204T
- Volvo S80 (2007–)2010Alle Motoren außer: B4204T6, D4164T, D4204T
- Volvo S80 (2007–)2011Alle Motoren außer: B4164T, B4204T6, B4204T7, D4164T
- Volvo S80 (2007–)2012–2013Alle Motoren außer: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2014Alle Motoren außer: B4164T, B4164T2, B4204T6, B4204T7, D4162T, D4204T5
- Volvo S80 (2007–)2015Alle Motoren außer: B4164T, D4162T, D4204T5
- Volvo V40 (2013–)2013Alle Motoren außer: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014Alle Motoren außer: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Alle Motoren außer: B4164T, D4162T
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: B6304T4, D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D4204T5
- Volvo V60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Alle Motoren außer: D4204T
- Volvo V70 (2008–)2010Alle Motoren außer: B4204T6, D4164T, D4204T
- Volvo V70 (2008–)2011Alle Motoren außer: B4164T, B4204T6, B4204T7, D4164T
- Volvo V70 (2008–)2012–2013Alle Motoren außer: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2014Alle Motoren außer: B4164T, B4164T2, B4204T7, D4162T, D4204T5
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, D4162T, D4204T5
- Volvo XC60 (2009–)2009
- Volvo XC60 (2009–)2010Alle Motoren außer: B4204T6
- Volvo XC60 (2009–)2011–2012Alle Motoren außer: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7
- Volvo XC60 (2009–)2014–2015Alle Motoren außer: B4204T7, D4204T5
- Volvo XC70 (2008–)2008–2013
- Volvo XC70 (2008–)2014–2015Alle Motoren außer: D4204T5
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Nur Motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle Motoren außer: B5254T9
Was bedeutet der Fehlercode?
The engine control module (ECM) registers misfires by measuring speed deviations in the flywheel. If cylinder 1 misfires too often, the fault code is stored. The code states which cylinder is affected. The cause may lie in the fuel, the air intake, the compression or the injection. The code is general and does not specify the type of fault.
Mögliche Ursachen
- Low fuel level
- Repeated cold starts where the engine does not warm up between them
- Contaminated or incorrect fuel
- Air leak
- Clogged or leaking injection valve
- Uneven compression or damaged injection valves
Was Sie tun können
- 1Read the fault codes; codes for camshaft control or the camshaft control valve are traced first
- 2Check that the fuel level is sufficient and that the correct fuel has been filled; also make sure the engine oil is at the right level
- 3Check the ignition coil and injection valve on cylinder 1 for damage and oxidised connectors
- 4If you have a diagnostic tool: read the misfire counter for cylinder 1 with the engine running and compare it with the other cylinders
- 5Have a workshop with diagnostic equipment check the compression, the fuel pressure and the crankcase ventilation, and update the software if a newer version is available
Symptome, die Sie bemerken können5
- The emissions warning light lights up or flashes
- The engine misfires and does not run on all cylinders
- The engine is hard to start
- Uneven idle and reduced performance
- A message appears in the text display
Was der Fehler beeinflussen kann2
- Rear oxygen sensor control is switched off
- Lambda control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.