VOLVO
ECM-P030300 - Cylinder 3 Misfire Detected. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (46)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: B5254T5, B6304T4, D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: B5254T5, B6304T4, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D4204T5
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D4204T5
- Volvo S80 (2007–)2007
- Volvo S80 (2007–)2008–2009Alle Motoren außer: D4204T
- Volvo S80 (2007–)2010Alle Motoren außer: B4204T6, D4164T, D4204T
- Volvo S80 (2007–)2011Alle Motoren außer: B4164T, B4204T6, B4204T7, D4164T
- Volvo S80 (2007–)2012–2013Alle Motoren außer: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2014Alle Motoren außer: B4164T, B4164T2, B4204T6, B4204T7, D4162T, D4204T5
- Volvo S80 (2007–)2015Alle Motoren außer: B4164T, D4162T, D4204T5
- Volvo V40 (2013–)2013Alle Motoren außer: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014Alle Motoren außer: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Alle Motoren außer: B4164T, D4162T
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: B6304T4, D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D4204T5
- Volvo V60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Alle Motoren außer: D4204T
- Volvo V70 (2008–)2010Alle Motoren außer: B4204T6, D4164T, D4204T
- Volvo V70 (2008–)2011Alle Motoren außer: B4164T, B4204T6, B4204T7, D4164T
- Volvo V70 (2008–)2012–2013Alle Motoren außer: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2014Alle Motoren außer: B4164T, B4164T2, B4204T7, D4162T, D4204T5
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, D4162T, D4204T5
- Volvo XC60 (2009–)2009
- Volvo XC60 (2009–)2010Alle Motoren außer: B4204T6
- Volvo XC60 (2009–)2011–2012Alle Motoren außer: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7
- Volvo XC60 (2009–)2014–2015Alle Motoren außer: B4204T7, D4204T5
- Volvo XC70 (2008–)2008–2013
- Volvo XC70 (2008–)2014–2015Alle Motoren außer: D4204T5
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012Nur Motor: B6324S5
- Volvo XC90 (2003–)2013–2014Alle Motoren außer: B5254T9
Was bedeutet der Fehlercode?
The fault concerns misfires on cylinder 3. The engine control module (ECM) measures oscillations in the flywheel, and if cylinder 3 misfires too often the code is stored. It is general and does not say what type of fault it is. The cause may lie in the fuel, the fuel pressure or the air intake.
Mögliche Ursachen
- Low fuel level
- Contaminated or incorrect fuel
- Air leak
- Damaged injection valves
- Dirty or damaged camshaft profile solenoid
- Fault in the EGR system
Was Sie tun können
- 1Read the fault codes and trace camshaft codes first, if there are any
- 2Make sure the engine oil is at the right level and that the fuel tank is not nearly empty
- 3Check the ignition coil and injection valve on cylinder 3 for damage and oxidised connectors
- 4If you have a diagnostic tool: read the misfire counter for cylinder 3 with the engine running and compare it with the other cylinders
- 5Have a workshop with diagnostic equipment check the camshaft profile solenoid and the compression, and update the software if a newer version is available
Symptome, die Sie bemerken können5
- The emissions warning light lights up or flashes
- The engine does not fire on every cylinder
- A message appears in the text display
- The engine is hard to start
- Reduced performance
Was der Fehler beeinflussen kann2
- Rear oxygen sensor control is switched off
- Lambda control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.