Was bedeutet der Fehlercode ECM-P030498?

Diagnose und Fehlercodedefinition für ECM-P030498 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo S80 (2007–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P030498 - Cylinder 4 Misfire Detected. Component Failures. Component or system over temperature

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

3 Modelle

S60 (2011–), S80 (2007–), V70 (2008–)

Modelle nach Baujahr und Motor anzeigen (9)

Was bedeutet der Fehlercode?

The catalytic converter can overheat if cylinder 4 misfires so that unburned fuel reaches the exhaust system. The engine control module (ECM) sets the fault code when such misfires are detected early after the engine starts.

Mögliche Ursachen

Poor fuel quality
Clogged or leaking injection valve
Incorrect fuel pressure
Air leak
Uneven compression
Incorrectly calculated ethanol content

Was Sie tun können

1Read the fault codes; camshaft-related codes should be traced first
2Check that the fuel suits the season and that the fuel level is sufficient
3Check that the intake system and the crankcase ventilation do not leak or are not clogged
4If you have a diagnostic tool: read the misfire counter for cylinder 4 in live data with the engine running and see whether it is raised compared with the other cylinders
5Have a workshop with diagnostic equipment check the injection valve and the VVT unit on cylinder 4, and the compression

Symptome, die Sie bemerken können5

The engine is hard to start
Uneven idle
Poor performance
The engine hesitates and surges while driven
The Check engine light lights up or behaves abnormally

Was der Fehler beeinflussen kann2

Rear oxygen sensor control is switched off
Lambda control is switched off

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.