VOLVO
ECM-P033500 - Crankshaft Position Sensor A Circuit. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
14 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (45)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Alle Motoren außer: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2013Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2007Alle Motoren außer: D5244T4, D5244T5
- Volvo S80 (2007–)2008Nur Motor: B5254T6, B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2009Alle Motoren außer: B4204S3, B4204S4, D4204T, D5244T4, D5244T5
- Volvo S80 (2007–)2010Alle Motoren außer: B4204S3, B4204S4, B4204T6, D4164T, D4204T
- Volvo S80 (2007–)2011Alle Motoren außer: B4164T, B4204S3, B4204S4, B4204T6, B4204T7, D4164T
- Volvo S80 (2007–)2012–2013Alle Motoren außer: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2014Alle Motoren außer: B4164T, B4164T2, B4204T11, B4204T12, B4204T15, B4204T6, B4204T7, D4204T5
- Volvo S80 (2007–)2015Alle Motoren außer: B4164T, B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2013Alle Motoren außer: B4164T, B4164T3
- Volvo V40 (2013–)2014Alle Motoren außer: B4164T, B4164T3, B4164T4
- Volvo V40 (2013–)2015Nur Motor: B5204T8, B5204T9, D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Alle Motoren außer: B4164T
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, B4204T11, D4204T14
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: B6304T4, D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012–2013Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4204T5
- Volvo V60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Nur Motor: B5254T6, B6304T2, B6324S
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8, B6304T2, B6324S, D5244T10
- Volvo V70 (2008–)2010Alle Motoren außer: B4204S3, B4204S4, B4204T6, D4164T, D4204T
- Volvo V70 (2008–)2011Nur Motor: B5254T10, B5254T11, B6304T4, B6324S5, D5204T2, D5244T10
- Volvo V70 (2008–)2012–2013Alle Motoren außer: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2014Alle Motoren außer: B4164T, B4164T2, B4204T11, B4204T7, D4204T5
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, B4204T11, D4204T5
- Volvo XC60 (2009–)2009Nur Motor: B6304T2
- Volvo XC60 (2009–)2010Alle Motoren außer: B4204T6
- Volvo XC60 (2009–)2011–2012Alle Motoren außer: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7
- Volvo XC60 (2009–)2014–2015Alle Motoren außer: B4204T10, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4204T5
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010–2013
- Volvo XC70 (2008–)2014–2015Alle Motoren außer: B4204T11, D4204T5
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) uses the crankshaft sensor signal to establish the flywheel position at top dead centre (TDC), and it also uses it to calculate engine speed. If the control module cannot establish TDC, or the signal is missing or wrong, the fault code is set. The fault may be caused by interference, poor connections, an incorrectly fitted sensor or a damaged sensor.
Mögliche Ursachen
- Signal interference
- Contact resistance or oxidation in the connections
- Incorrectly fitted crankshaft sensor
- Loose connection
- Damaged crankshaft sensor
- Cables short-circuited to ground or voltage
Was Sie tun können
- 1Read the fault code, clear it and test drive the car
- 2Check that the crankshaft sensor is correctly fitted and has not worked loose
- 3Check the connectors to the crankshaft sensor for play, contact resistance and oxidation
- 4Keep cables with high current draw away from the crankshaft sensor wiring, since interference can make the engine hard to start
- 5Have a workshop with diagnostic equipment check the crankshaft sensor and its wiring and replace it if needed
Symptome, die Sie bemerken können4
- The engine is hard to start
- Reduced performance
- The engine stalls
- The automatic start/stop function does not work
Was der Fehler beeinflussen kann2
- The camshaft sensor signal is used instead
- Variable valve timing control is disabled
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.