VOLVO
ECM-P03362F - Crankshaft Position Sensor A Circuit Range/Performance. General Signal Failures. Signal erratic
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Nur Motor: D4164T
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Nur Motor: D4164T
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the signal from the crankshaft position sensor while the engine runs. The fault is stored when the signal is missing or faulty, and it can be linked to engine speed being too high or to the sensor wiring. The signal is described as erratic, meaning it is not steady.
Mögliche Ursachen
- Too high engine speed
- Short circuit in the sensor wiring
Was Sie tun können
- 1If you have a diagnostic tool, start the engine and read the fault status for the code.
- 2Check that the fuses are intact.
- 3With the ignition off, check that the sensor connector is secure and free from oxidation and contact resistance.
- 4Use a multimeter to check that the sensor wires are not shorted to ground (the body) or to supply voltage.
- 5Check that the sensor is correctly fitted in its position.
- 6If you have a diagnostic tool, follow the engine speed in live data while the engine runs and check whether the value rises or falls unexpectedly.
Symptome, die Sie bemerken können3
- Engine does not start but cranks
- Engine stalls
- Engine lacks power while driving
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.