VOLVO
ECM-P034068 - Camshaft Position Sensor A Circuit (Bank 1 or single sensor). Algorithm Based Failures. Event information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011–2014Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4204T7
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
This is an event controlled code, meaning it shows an event and is intended as information. It does not point to a fault in the control module where it is active. The engine control module sets the code when it interprets the camshaft sensor signal as faulty, and the code disappears when the conditions no longer apply.
Mögliche Ursachen
- Another fault that this code is a follow-on to
Was Sie tun können
- 1Read all the fault codes in the engine control module and see which ones relate to the camshaft sensor. Those are the ones to address first.
- 2Fix the root fault according to the code that was set first, then read the fault codes again with a diagnostic tool.
- 3This code is a consequence of other codes and does not need to be erased separately. It disappears when the conditions no longer apply.
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.