VOLVO
ECM-P034B00 - Crankshaft Position Sensor - Crankshaft Direction Incorrect. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (26)
- Volvo S60 (2011–)2011Nur Motor: D4162T
- Volvo S60 (2011–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2014Nur Motor: B4204T11, B4204T12, B4204T15, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Alle Motoren außer: B4164T, B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: B4204T11, D4162T, D4204T14, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2011Nur Motor: D4162T
- Volvo V60 (2011–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2012Nur Motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Nur Motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014Alle Motoren außer: B4164T, B4164T2, B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Alle Motoren außer: B4164T, B4164T2, B5204T9, B6304T4
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013–2014Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Alle Motoren außer: B4204T7, B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2012–2015Alle Motoren außer: B6304T4, B6324S4, B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) calculates the crankshaft direction from the signals from the crankshaft sensor and the flywheel sensor. The fault is stored when the calculated direction is wrong, meaning the position recorded when the engine stopped does not match its actual position at start. It can occur in connection with automatic start/stop.
Mögliche Ursachen
- Contact resistance or oxidation in the connections
- Open circuit on the signal cable
- Damaged crankshaft sensor
- Damaged pulse wheel or flywheel
- Damaged cables or connectors
- Crankshaft sensor fitted incorrectly
Was Sie tun können
- 1If you have a diagnostic tool, start the engine and read the fault status. 'Fault found' means a permanent fault.
- 2Check that the fuses are intact.
- 3With the ignition off, check that the connectors at the crankshaft sensor and the flywheel sensor are secure and free from oxidation.
- 4Use a multimeter to check that the signal wire from the crankshaft sensor has no open circuit.
- 5If your diagnostic tool shows it, read the crankshaft sensor signal in live data at engine start.
- 6If the fault returns, have a workshop check the pulse wheel, the flywheel and the sensors.
Symptome, die Sie bemerken können5
- Engine does not start, sometimes or every time
- Automatic engine start/stop does not work
- Car hesitates or jerks while driving
- Car lacks power, especially when pulling away from standstill
- Text message and yellow warning symbol shown in the display
Was der Fehler beeinflussen kann2
- The automatic engine start/stop function is switched off
- Maximum engine speed is limited
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.