VOLVO
ECM-P036668 - Camshaft Position Sensor B Circuit Range/Performance (Bank 1). Algorithm Based Failures. Event information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011–2014Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4204T7
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
This is an event controlled code, which is information rather than a fault in the control module where it is active. The ECM sets the code when it interprets the signal from the exhaust camshaft sensor on bank 1 as faulty, and the code disappears when the conditions no longer apply.
Mögliche Ursachen
- Another fault that this code is a follow-on to
Was Sie tun können
- 1Read the fault codes in the engine control module with a diagnostic tool and start with the one that concerns the root fault on the camshaft sensor.
- 2Fix the root fault first, then read the fault codes again, since this code may then disappear.
- 3The code does not need to be erased separately. It disappears by itself when the conditions no longer apply.
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.