Was bedeutet der Fehlercode ECM-P036692?

Diagnose und Fehlercodedefinition für ECM-P036692 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P036692 - Camshaft Position Sensor "B" Circuit Range/Performance (Bank 1). Component Failures. Performance or incorrect operation

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

8 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

The code applies to the exhaust camshaft sensor on bank 1 and is set when the camshaft segments fall outside a set range during start-up. The code does not say which type of fault it is.

Mögliche Ursachen

Fault in the cable harness or connectors that only occurs now and then
Camshaft sensor fitted incorrectly
Damaged camshaft sensor

Was Sie tun können

1If you have a diagnostic tool, start the engine and read the fault status. 'Fault found' means the fault is permanent.
2Check that the fuses are intact.
3With the ignition off, check that the exhaust camshaft sensor on bank 1 is firmly fixed and correctly fitted in its position.
4Check that the connector at the exhaust camshaft sensor is free from contact resistance and oxidation.
5Check that the wiring to the exhaust camshaft sensor on bank 1 has no chafing or loose connectors.
6If the fault returns, have a workshop check the exhaust camshaft sensor on bank 1.

Symptome, die Sie bemerken können1

Check engine light is on or behaves abnormally

Was der Fehler beeinflussen kann1

The ECM uses the crankshaft sensor signal instead

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.