Was bedeutet der Fehlercode ECM-P036815?

Diagnose und Fehlercodedefinition für ECM-P036815 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-P036815 - Camshaft Position Sensor B Circuit High (Bank 1). General Electrical Failures. Circuit short to battery or open

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

7 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (20)

Was bedeutet der Fehlercode?

The code applies to the exhaust camshaft sensor on bank 1, where the signal is constantly high. It can come from a short circuit to supply voltage or from an open circuit in the wiring.

Mögliche Ursachen

Open circuit in the signal wire
Signal wire short circuit to supply voltage
Supply wire short circuit to ground
Open circuit in the ground lead
Damaged camshaft sensor

Was Sie tun können

1If you have a diagnostic tool, start the engine and read the fault status. 'Fault found' means the fault is permanent.
2Check that the fuses are intact.
3With the ignition off, check the connector at the exhaust camshaft sensor on bank 1 for contact resistance and oxidation.
4Use a multimeter to check that the signal wire is continuous and has no contact with supply voltage.
5Use a multimeter to check that the ground lead has no open circuit and that the supply wire is not shorted to ground.
6Check that the exhaust camshaft sensor is firmly fixed in its position.

Symptome, die Sie bemerken können2

Engine does not start, sometimes or every time
Engine is hard to start and cranks slowly

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.