VOLVO
ECM-P038100 - Glow Plug/Heater Indicator Circuit. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The ECM drives the glow plugs via the glow plug relay and checks the signal to the relay. Although the code is named as a heater indicator circuit fault, it applies to the signal to the relay. The code is stored when that signal is faulty and does not say which type of fault it is.
Mögliche Ursachen
- Temperature too high
- Contact resistance, oxidation or open circuit in the connections
Was Sie tun können
- 1If you have a diagnostic tool, switch on the ignition and read the fault status for the code. 'Fault found' means the fault is permanent.
- 2Check that the fuses are intact.
- 3With the ignition off, check the connectors at the glow plug relay for contact resistance, oxidation and open circuit.
- 4Use a multimeter to check that the wire to the glow plug relay has no open circuit.
- 5Check that the glow plug relay is firmly fitted and not damaged.
- 6If the fault returns, have a workshop check the glow plug relay and its signal from the engine control module.
Symptome, die Sie bemerken können2
- Engine is hard to start and cranks slowly, sometimes or every time
- Engine is hard to start and cranks slowly on a cold start
Was der Fehler beeinflussen kann1
- Glow plug relay is not activated
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.