VOLVO
ECM-P03A000 - Cylinder 2 Fuel Pressure Sensor Circuit Range/Performance. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (8)
- Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
- Volvo V40 (2013–)2015Nur Motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
- Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
- Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
- Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
- Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5
Was bedeutet der Fehlercode?
The engine control module (ECM) compares the fuel pressure measured by the pressure sensors in the injectors. The fault is set when the pressure sensor in the injector for cylinder 2 differs from the readings of the other three sensors. The sensor in that cylinder is therefore the one causing the difference.
Mögliche Ursachen
- Pressure sensor in the injector for cylinder 2 is faulty
Was Sie tun können
- 1If you have a diagnostic tool, compare the reading from the sensor for cylinder 2 with the other three with the engine at idle
- 2Check that the connector at the injector for cylinder 2 is firmly seated and free from oxidation
- 3Measure with a multimeter that the wire to the injector for cylinder 2 has no open circuit and no contact with ground (the body)
- 4Clear the fault code and road test the car to see whether it comes back
- 5If the fault remains, have a workshop check the pressure sensor in the injector for cylinder 2
Symptome, die Sie bemerken können1
- The Check engine (malfunction indicator) light comes on or behaves abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.