VOLVO
ECM-P040268 - Exhaust Gas Recirculation A Flow Excessive Detected. Algorithm Based Failures. Event information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2009Nur Motor: D5244T10
- Volvo S80 (2007–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2009Nur Motor: D5244T10
- Volvo V70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors exhaust gas recirculation (EGR) and sets the fault when the flow is too low. Although the code is named as excessive flow, the condition is a flow that is too low. The code is an information code for an algorithm fault in the control module, and it does not point to any single component.
Mögliche Ursachen
- No specific cause is listed for this particular code
Was Sie tun können
- 1If other fault codes for the air system are stored alongside this one, troubleshoot from those first
- 2The code has no troubleshooting of its own, so start with any other air system fault codes that are present
- 3Read and clear the fault code, then see whether it returns with the engine running
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.