VOLVO
ECM-P040984 - Exhaust Gas Recirculation Sensor A Circuit. Bus Signal / Message Failures. Signal below allowable range
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The fault concerns the position sensor A on the EGR valve and is set when the signal is below the permitted limit. Although the code is named as a bus or message fault, the condition concerns the PWM signal from the sensor.
Mögliche Ursachen
- Fault codes ECM-P040931 and ECM-P040985 may share the same cause and should be read together
- EGR valve has jammed in the open position
- EGR valve has jammed in the closed position
- Damaged position sensor or damaged EGR valve
- Contact resistance or oxidation in the connectors
- Open circuit in the signal cable
Was Sie tun können
- 1If you have a diagnostic tool, start the engine and read the fault status for the code
- 2Check that the EGR valve moves freely and is not jammed in any position
- 3Check that the connectors to the position sensor are firmly seated and not oxidised
- 4Use a multimeter to check that the signal cable has no open circuit
- 5Clean the EGR valve of dirt and soot if it is clogged
- 6If the fault remains, have a workshop check the position sensor and the EGR valve
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- EGR control is lost
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.