VOLVO
ECM-P042009 - Catalyst System Efficiency Below Threshold (Bank 1). General Failure Information. Component Failures
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (20)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Nur Motor: B4164T
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Nur Motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
The code concerns the catalytic converter efficiency on bank 1 and is a component fault code. The ECM continuously compares the signal from the rear oxygen sensor with the front one, and the code is set when catalytic converter efficiency deviates too much.
Mögliche Ursachen
- Misfiring
- Leakage in the intake system
- Leakage in the exhaust system
- Faulty fuel pressure
- Uneven compression
- Damaged catalytic converter
Was Sie tun können
- 1Look for air leaks in the intake system, for example at hoses
- 2Look for leakage in the exhaust system, particularly at joints and seams
- 3If you have a diagnostic tool, read the fault status with the engine running and see whether the fault is active
- 4Have a workshop check the fuel pressure and the engine compression, since this needs measuring
- 5If the fault check finds nothing, have a workshop judge whether the catalytic converter needs replacing
Symptome, die Sie bemerken können1
- The Check engine (malfunction indicator) light comes on or behaves abnormally
Was der Fehler beeinflussen kann1
- Rear oxygen sensor control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.