VOLVO
ECM-P042700 - Particulate Filter Temperature Sensor Circuit Low (Bank 1, Sensor Circuit 2). General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
13 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (46)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Nur Motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle Motoren außer: B5254T7
- Volvo S40 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Nur Motor: D5204T2, D5244T10
- Volvo S60 (2011–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007–2008Nur Motor: D5244T4, D5244T5
- Volvo S80 (2007–)2009Nur Motor: D5244T10, D5244T4, D5244T5
- Volvo S80 (2007–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Nur Motor: D5204T2, D5244T10
- Volvo S80 (2007–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: D5204T6
- Volvo V50 (2004–2013)2011–2012Nur Motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Nur Motor: D5204T2, D5244T10
- Volvo V60 (2011–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V60 (2011–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V60 (2011–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo V70 (2008–)2008Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2009Nur Motor: D5244T10, D5244T4, D5244T5
- Volvo V70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Nur Motor: D5204T2, D5244T10
- Volvo V70 (2008–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014–2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC60 (2009–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC70 (2008–)2010Nur Motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Nur Motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The fault concerns the temperature sensor before the particle filter on bank 1 and is set when the signal from it is incorrect. The code is named for a low signal, and the car then uses a calculated temperature instead of the sensor reading.
Mögliche Ursachen
- Fault codes ECM-P042700 and ECM-P042800 may share the same cause and should be read together
- Signal cable short-circuited to supply voltage
- Signal cable short-circuited to ground
- Open circuit in the signal cable
- Contact resistance or oxidation in the connections
- Damaged particle filter temperature sensor
Was Sie tun können
- 1Start the engine and read the fault status with a diagnostic tool, if you have one
- 2Check that the connectors to the temperature sensor before the particle filter are firmly seated and not oxidised
- 3Use a multimeter to check that the signal cable has no break and is not short-circuited to ground or supply voltage
- 4Read and clear the fault code, then road test the car to see whether it comes back
- 5If the fault remains, have a workshop check the temperature sensor before the particle filter
Symptome, die Sie bemerken können2
- The car lacks power
- The Check engine (malfunction indicator) light comes on or behaves abnormally
Was der Fehler beeinflussen kann2
- A calculated temperature is used instead
- The car goes into limp-home mode
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.