ECM-P042D00
VOLVO
ECM-P042D00 - Particulate Filter Temperature Sensor Circuit High (Bank 1, Sensor Circuit 2). General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
8 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (23)
- Volvo S60 (2011–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Nur Motor: D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: D5204T4, D5204T6
- Volvo V40 (2013–)2015Nur Motor: D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Nur Motor: D5204T6
- Volvo V60 (2011–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2012Nur Motor: D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Nur Motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014–2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Nur Motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2012–2013Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Was bedeutet der Fehlercode?
The fault concerns the temperature sensor before the particle filter on bank 1 and is set when the signal from it is faulty. The code is named for a high signal, and the condition is a signal that does not follow a calculated value.
Mögliche Ursachen
- Signal cable short-circuited to supply voltage
- Damaged particle filter temperature sensor
Was Sie tun können
- 1Use a multimeter to check whether the signal cable to the sensor has voltage with the ignition off
- 2Check that the connectors to the sensor are firmly seated and free from oxidation
- 3Read the fault status with a diagnostic tool, if you have one, and see whether the fault is active after the engine has started
- 4If the fault remains, have a workshop check the temperature sensor before the particle filter
Symptome, die Sie bemerken können2
- The car lacks power
- The Check engine (malfunction indicator) light comes on or behaves abnormally
Was der Fehler beeinflussen kann1
- The car goes into limp-home mode
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.